The Surgic Touch is a piezoelectric system for bone surgery. Three-dimensional ultrasonic oscillations enable micrometric, selective cutting with clear visibility through the cavitation effect. Automatic tuning compensates for tip wear and maintains constant performance.
Special Features (3rd Generation)
-
Third-generation piezoelectric motors for bone surgery(manufacturer/dealer specification).
-
Soft tissue protection: selective cutting – bone processing without damaging nerves, vessels, or membranes (manufacturer/dealer specification).
-
Cooling & Temperature: Irrigation + ultrasound keep the cutting temperature typically < 38 °C (manufacturer/dealer specification).
-
Vibration amplitude: approx. 20–100 µm (manufacturer/dealer specification).
-
Micrometric cut: minimal incision approx. 3.5 mm × 0.5 mm (manufacturer/dealer specification).
-
Intuitive, easy-to-clean touch operation (manufacturer/dealer specification).
-
Irrigation system: works with inexpensive standard consumables; peristaltic tube reusable (recommended upper limit, see reprocessing).
-
Equipment: two LED handpieces + 14 titanium tips (kit dependent).
System & Components
-
Control unit with mode selection (Bone/Perio/Endo/Clean), power & water control.
-
2× Surgic Touch Handpieces (autoclavable) with LED illumination.
-
Multifunction footswitch (e.g., mode change, power, water, clean).
-
Peristaltic pump incl. tube set; recommended reprocessing limited.
-
Tip kits, torque wrenches, sterilization boxes.
Operating Modes & Workflow
Bone Mode
- 7 power levels (Power 1–7) for different bone densities from very high to very low.
- Always start without tip contact so that the electronics can correctly detect resonance (power protection).
Perio Mode
- Adjustable power & water output.
Endo Mode
- Adjustable power & water output.
Clean
- Flushing mode for lines before/after treatment (recommended ≥ 25 s).
Compatible Inserts (Excerpt)
-
Bone: US1, US1L, US1R, US2, US3, US4, US5, US6
-
Sinus Lifting: UL1, UL2, UL3, UL4, UL5
-
Excision/Exelcymosis: UC1
-
Implant: UI1, UI2, UI7, UI8, UI9
Technical Data (Excerpt)
-
Operating frequency: 24–36 kHz
-
Cooling flow: approx. 25–110 ml/min
-
Power supply: ~100–240 V, 50/60 Hz, 150 VA; fuses 2× 1.6 AT/250 V
-
Operation: intermittent 60 s ON / 10 s OFF
-
Protection classes: Device IPX1 / Footswitch IPX6
-
Dimensions (W×D×H): 276 × 267 × 110 mm
-
Weight: approx. 2.8 kg
-
Safety: Class I, Type-B applied part
Source specifications/modes: Surgery-X IFU.
Reprocessing & Durability (Excerpt)
-
Max. Temperature: Do not exceed 138 °C.
-
Cycle guidelines: Pump tube ≤ 8 cycles; handpiece & silicone holder ≤ 100; tips ≤ 300; connectors/tray/torque wrench up to approx. 300.
-
Validated procedures: Cleaning/disinfection according to EN standards; always dry contacts before connection.
Regulatory & Warranty
-
Medical Device: Class IIa, CE 0197 (TÜV Rheinland) – manufacturer/dealer specification.
-
Legal Notice: Terms/prices/intended use/features/regulatory see respective product page; for dental professionals only; not reimbursable under LPP; please read IFU/label before use. (manufacturer/dealer specification)
-
Warranty according to IFU: 2 years device, 1 year handpiece with cable.
-
Manufacturer/Dealer Specification: Motor 5 years, handpiece & accessories 1 year. (Note: differs from IFU specification)
-
Brand/Manufacturer: DTE Woodpecker / WOODPECKER DTE (China)
-
Item No.: SMWP-SURGIC-3G
Quick Overview (Specs)
Frequency 24–36 kHz • Flow rate ~25–110 ml/min • Power 100–240 V / 150 VA • Interval 60 s ON / 10 s OFF • IP: Device IPX1 / Pedal IPX6 • Dimensions 276×267×110 mm • Weight ~2.8 kg
